HP Deskjet 932c Printer - To replace a print cartridge:

background image

To replace a print cartridge:

1

To access the print cartridge
cradle, lower the Fold-Up tray,
and then press the Power Button

to turn on the printer.

2

Open the top cover. The cradle
moves to an accessible position.

3

Raise the cradle latch.

4

Lift the print cartridge out and
discard it.

Keep print cartridges out of the reach of children.

Note:

When buying replacement print cartridges, check the part numbers

carefully. The print cartridge numbers for your printer are:

Black HP 516

45

Series

Tri-Color HP C65

78

Series

Note:

When a print cartridge runs out of ink, leave the empty cartridge in

the cradle until you can replace it. The printer does not print with only one
print cartridge in the cradle.

Cradle latch

Cartridge

Warning

background image

28

Using and Caring for Your Print Cartridges

3

5

Remove the replacement print cartridge from its packaging and carefully
remove the protective vinyl tape.

Do NOT

touch the print cartridge ink nozzles or copper contacts. Touching

these parts will result in clogs, ink failure, and bad electrical connections.
Also,

do NOT

remove the copper strips; these are required electrical

contacts.

6

Push the print cartridge firmly, straight down into the print cartridge cradle.

7

Close the cradle latch. When the latch is fully closed, you will hear a click.

8

Load plain white paper in the IN tray.

9

Close the top cover, then a calibration page will print.

10

If the Print Cartridge Status

Light continues to blink after you install the

new print cartridge, check the part number on the print cartridge to ensure you
installed the correct one.

Do NOT

touch the

ink nozzles

Do NOT

touch or

remove the copper
contacts

Remove the protective
vinyl tape

Black

Tri-Color

Warning

Note:

Any time you install a new print cartridge, the printer software prints

a calibration page to ensure your print quality. If you are in the middle of
printing and stop to change a print cartridge, the software will wait until
your printing has completed before it executes the calibration test.

background image

29

Using and Caring for Your Print Cartridges

3